The Beginner’s Guide to Undermount Sink Installation

Undermount sinks are a favorite among homeowners for their sleek, seamless appearance. But installing one requires more precision than a typical drop-in sink. If you’re considering a DIY project, understanding the process beforehand can save you time, money, and frustration. Here’s your beginner’s guide to getting it right.

Start by ensuring your countertop material can support an undermount installation. Solid surfaces like granite, quartz, or marble work best because they can handle the sink’s weight without risk of cracking. Avoid laminate countertops unless reinforced.

Before removing your old sink, measure the cutout carefully and dry-fit your new sink to make sure it aligns properly. Apply a bead of high-quality silicone sealant around the underside of the countertop opening, then lift the new sink into position from below. Use mounting brackets or clips to secure it tightly—this is crucial to prevent sagging over time.

Once the sink is in place, tighten all clamps evenly and remove any excess sealant. Allow it to cure for at least 24 hours before reconnecting plumbing. Finally, attach your faucet, drain, and garbage disposal, checking for leaks once everything is connected.

If it sounds intimidating, don’t worry. At I Hate My Sink, we specialize in undermount installations that look flawless and function perfectly. One call, and you’ll never have to worry about uneven edges or water leaks again.

‍